search

Burley 09 Encore Manuel d'utilisateur Page 1

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Lampes de poche Burley 09 Encore. Burley 09 Encore User's Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
    • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Contents:
(1) Burley Owner’s Instruction and Safety Manual
(1) Hitch
(1) Clear light with batteries included
(1) Red light with batteries included
(2) Phillip Pan screws
(2) Brackets for lights
(1) Wheel guard assembly:
(2) wheel guards
(4) screws
(1) 5mm hex key wrench
Tools Required: Phillips screwdriver
4mm hex wrench
10mm or open end wrench
Note: Consult your Burley Owner’s
Instruction and Safety Manual for
wheel guard and hitch installation
instructions.
Roll Bar Installation
1. If handle bar receivers are already
installed, loosen and remove handle bar
knobs and outer handle bar receivers.
FIGURE 1
2. Using wrench, loosen and remove
lock nuts and screws from handle bar
receivers.
3. From trailer front, slide roll bar into upper
handle bar receivers, with curved front
extending above trailer body.
4. Match holes in roll bar and inner handle
bar receivers, re-install screws and
tighten lock nuts.
5. Replace outer handle bar receivers and
tighten knobs.
Installation Instructions
for ‘09 d’lite
™
, Encore
®
and Solo
™
(Euro) Child Trailers
Contents:
(1) Burley Owner’s Instruction and Safety Manual
(1) Hitch
(1) Clear light with batteries included
(1) Red light with batteries included
(2) Phillip Pan screws
(2) Brackets for lights
(1) Wheel guard assembly:
(2) wheel guards
(4) screws
(1) 5mm hex key wrench
Tools Required: Phillips screwdriver
4mm hex wrench
10mm or open end wrench
Note: Consult your Burley Owner’s
Instruction and Safety Manual for
wheel guard and hitch installation
instructions.
Roll Bar Installation
1. If handle bar receivers are already
installed, loosen and remove handle bar
knobs and outer handle bar receivers.
FIGURE 1
2. Using wrench, loosen and remove
lock nuts and screws from handle bar
receivers.
3. From trailer front, slide roll bar into upper
handle bar receivers, with curved front
extending above trailer body.
4. Match holes in roll bar and inner handle
bar receivers, re-install screws and
tighten lock nuts.
5. Replace outer handle bar receivers and
tighten knobs.
Installation Instructions
for ‘09 d’lite
™
, Encore
®
and Solo
™
(Euro) Child Trailers
FIGURE 1: Roll Bar Installation
Lock Nuts
Rear Assembly
Frame
Roll Bar
Front of Trailer
Inner Handle bar
Receiver
Outer Handle bar
Receiver
Handle bar
Knob
Screws
FIGURE 1: Roll Bar Installation
Lock Nuts
Rear Assembly
Frame
Roll Bar
Front of Trailer
Inner Handle bar
Receiver
Outer Handle bar
Receiver
Handle bar
Knob
Screws
Vue de la page 0
1 2

Résumé du contenu

Page 1 - Roll Bar Installation

Contents:(1) Burley Owner’s Instruction and Safety Manual(1) Hitch(1) Clear light with batteries included(1) Red light with batteries included(2) Phil

Page 2

B U R L E Y D E S I G NCopyright © 2008 by Burley Design LLC. “Burley” is a registered trademark of Burley Design LLC : Rev 06/08 : 170056 Euro d’l

Commentaires sur ces manuels

Pas de commentaire
  • D-ILA Amazilla Envizen Nti Champion-juicer
  • Amcor Refroidisseurs de vin Freestyle Montres sportives Craftsman Bureaux d'ordinateur AEG Perceuses combinées sans fil Advantech Convertisseurs de médias en réseau
  • JVC EM32FL Ge PT970SRSS Olympus Stylus 1000 Mackie D-2 Electrolux EOC5851AAX
  • Mares NEMO EXCEL Manuel de l'utilisateur AEG L6.0JUBI Guide de démarrage rapide Acer V246HL Manuel de l'utilisateur ASROCK A75M Manuel de l'utilisateur Dell PowerEdge M710HD Manuel de l'utilisateur